{"title":"Neodymium — Countersunk Pots","description":"\u003cp\u003eNeodymium countersunk hole magnets allow flush screw-mount installation with a flat fastening surface and no protruding hardware. The countersunk recess accepts standard flathead screws to secure the magnet firmly in place while the rare earth face provides powerful holding force against ferrous surfaces. Ideal for cabinet closures, furniture fittings, display fixtures, production jigs, and OEM product assembly. Available in disc and ring profiles with a range of countersink angles to suit your application.\u003c\/p\u003e","products":[{"product_id":"16-x-5mm-pot-with-3-5mm-countersunk-hole-rare-earth","title":"16mm x 5mm Pot with 3.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003e Dimensions: Ø16mm (Diameter) x 5mm (Thickness), Ø3.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mmm   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Pull Strength: 5kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003eOrder Units: Bulk discounts available on orders of 1,000pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":36873531719847,"sku":"3711","price":3.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/products\/3711-single__86225.png?v=1605836659"},{"product_id":"25-x-8mm-pot-with-5-5mm-countersunk-hole-rare-earth","title":"25mm x 8mm Pot with 5.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003eDimensions: Ø 25mm (Diameter)  x  8mm (Thickness),  Ø 5.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Pull Strength: 14kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism:\"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 8mm thickness.The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003eOrder Units: Available in individual units Bulk discounts available on orders of 1,000pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":36873576251559,"sku":"3713","price":6.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/BOXED_AUSSIEMAG_1.jpg?v=1691367259"},{"product_id":"42-x-9mm-pot-with-6-5mm-countersunk-hole-rare-earth","title":"42mm x 9mm Pot with 6.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003eDimensions: Ø 42mm (Diameter) x 9mm (Thickness),  Ø 6.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Pull Strength: 37kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003eOrder Units: Available in individual units. Bulk discounts available on orders of 1,000pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":36873637527719,"sku":"3715","price":25.53,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/1000055821.jpg?v=1739941696"},{"product_id":"20mm-x-7mm-pot-with-4-5mm-countersunk-hole-rare-earth","title":"20mm x  7mm Pot with 4.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003e Dimensions: Ø 20mm (Diameter) x 7mm (Thickness),  Ø 4.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Strength: 6kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 7mm thickness. The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003eOrder Units: Bulk discounts available on orders of 1,000pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":43392374177959,"sku":"3712","price":5.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/products\/3712-single__41284.png?v=1603838207"},{"product_id":"32mm-x-8mm-pot-with-5-5mm-countersunk-hole-rare-earth","title":"32mm x 8mm Pot with 5.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003eDimensions: Ø 32mm (Diameter)  x  8mm (Thickness),  Ø 5.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Strength: 25kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 8mm thickness. The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C   \u003c\/p\u003e\n\u003cp\u003eOrder Units: Available in individual units. Bulk discounts available on orders of 1,000pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":36873611247783,"sku":"3714","price":8.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/1000055566.jpg?v=1739494269"},{"product_id":"36-x-9mm-pot-with-6-5mm-countersunk-hole-rare-earth","title":"36mm x 9mm Pot with 6.5mm Countersunk Hole (Rare Earth)","description":"\u003cp bis_size='{\"x\":11,\"y\":9,\"w\":497,\"h\":78,\"abs_x\":428,\"abs_y\":118}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":9,\"w\":409,\"h\":38,\"abs_x\":428,\"abs_y\":118}'\u003eDimensions: Ø36mm (Diameter) x 9mm (Thickness),  Ø 6.5mm (Countersunk hole diameter)\u003c\/strong\u003e\u003cspan bis_size='{\"x\":201,\"y\":29,\"w\":3,\"h\":18,\"abs_x\":618,\"abs_y\":138}'\u003e \u003c\/span\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp bis_size='{\"x\":11,\"y\":103,\"w\":497,\"h\":78,\"abs_x\":428,\"abs_y\":212}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":103,\"w\":126,\"h\":18,\"abs_x\":428,\"abs_y\":212}'\u003ePull Strength: 29kg\u003c\/strong\u003e\u003cspan bis_size='{\"x\":138,\"y\":103,\"w\":3,\"h\":18,\"abs_x\":555,\"abs_y\":212}'\u003e \u003c\/span\u003eThe approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp bis_size='{\"x\":11,\"y\":198,\"w\":497,\"h\":78,\"abs_x\":428,\"abs_y\":307}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":198,\"w\":222,\"h\":18,\"abs_x\":428,\"abs_y\":307}'\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e\u003cspan bis_size='{\"x\":234,\"y\":198,\"w\":3,\"h\":18,\"abs_x\":651,\"abs_y\":307}'\u003e \u003c\/span\u003emagnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp bis_size='{\"x\":11,\"y\":292,\"w\":497,\"h\":58,\"abs_x\":428,\"abs_y\":401}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":292,\"w\":74,\"h\":18,\"abs_x\":428,\"abs_y\":401}'\u003eGrade: N38\u003c\/strong\u003e\u003cspan bis_size='{\"x\":86,\"y\":292,\"w\":3,\"h\":18,\"abs_x\":503,\"abs_y\":401}'\u003e \u003c\/span\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp bis_size='{\"x\":11,\"y\":367,\"w\":497,\"h\":97,\"abs_x\":428,\"abs_y\":476}'\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp bis_size='{\"x\":11,\"y\":481,\"w\":497,\"h\":39,\"abs_x\":428,\"abs_y\":590}'\u003eOrder Units: Available in individual units. Bulk discounts available on orders of 1,000pcs or more. \u003c\/p\u003e\n\u003cp bis_size='{\"x\":11,\"y\":536,\"w\":497,\"h\":97,\"abs_x\":428,\"abs_y\":645}'\u003e\u003cstrong data-end=\"268\" data-start=\"245\" bis_size='{\"x\":11,\"y\":536,\"w\":134,\"h\":18,\"abs_x\":428,\"abs_y\":645}'\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\" bis_size='{\"x\":146,\"y\":536,\"w\":0,\"h\":18,\"abs_x\":563,\"abs_y\":645}'\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\" bis_size='{\"x\":93,\"y\":614,\"w\":46,\"h\":18,\"abs_x\":510,\"abs_y\":723}'\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\" bis_size='{\"x\":146,\"y\":614,\"w\":199,\"h\":18,\"abs_x\":563,\"abs_y\":723}'\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":37309750378663,"sku":"3718","price":13.69,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/products\/3718-single__27077.png?v=1605160769"},{"product_id":"48-x-11-5mm-pot-with-8-5mm-countersunk-hole-rare-earth","title":"48mm x 11.5mm Pot with 8.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003eDimensions: Ø 48mm (Diameter)  x  11.5mm (Thickness),  Ø 8.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Strength: 68kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism:\"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness.The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003eOrder Units: Available in individual units. Bulk discounts available on orders of 1,000pcs or more\u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":36873672032423,"sku":"3716","price":40.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/products\/3716-single__47829.png?v=1603420988"},{"product_id":"60-x-15mm-pot-with-8-5mm-countersunk-hole-rare-earth","title":"60mm x 15mm Pot with 8.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003eDimensions: Ø 60mm (Diameter) x 15mm (Thickness),  Ø 8.5mm (Countersunk hole diameter)\u003c\/strong\u003e The dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Strength: 112kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 15mm thickness.The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N38\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003c\/p\u003e\n\u003cp\u003eFeatures:- Magnet is encapsulated on all but one side with a protective steel holding pot.- Incorporates a countersunk hole for use with flathead screws.- Powerful Rare Earth (Neodymium) permanent magnet.- High gloss Nickel coating, for protection against corrosion.- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003eOrder Units: Available in individual units. Bulk discounts available on orders of 100pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":36873706668199,"sku":"3717","price":76.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/products\/3717-multi__60009.png?v=1601537141"},{"product_id":"20mm-x-13-5mm-x-5mm-rectangular-pot-with-3mm-countersunk-hole-rare-earth","title":"20mm x 13.5mm x 5mm Rectangular Pot with 3mm Countersunk Hole (Rare Earth)","description":"\u003ctable height=\"50\" style=\"font-size: 0.875rem; width: 86.1314%;\" width=\"100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.0329%;\"\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eL (mm)\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 17.0329%; text-align: center;\"\u003e\u003cp\u003e\u003cstrong\u003eW (mm)\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.2545%; text-align: center;\"\u003e\u003cp\u003e\u003cstrong\u003eH (mm) \u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.2545%; text-align: center;\"\u003e\u003cp\u003e\u003cstrong\u003eM (mm)\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.2545%; text-align: center;\"\u003e\u003cp\u003e\u003cstrong\u003eWeight (g)\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd style=\"width: 17.0329%;\"\u003e\u003cp\u003e20\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 17.0329%;\"\u003e\u003cp\u003e13.5\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.2545%;\"\u003e\u003cp\u003e5\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.2545%;\"\u003e\u003cp\u003e3\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.2545%;\"\u003e\u003cp\u003e9\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePull Strength:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e7kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirection of Magnetism:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGrade:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eN35\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- This Rectangular (Channel) Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr\u003e- Incorporates a countersunk hole for use with flathead screws.\u003cbr\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr\u003e- Maximum operating temperature 80°C \/ 100°C\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder Units:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSingle\u003c\/strong\u003e (Bulk discounts available on orders of 1,000pcs or more)\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":45173731983527,"sku":"3682","price":7.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/a4e08d2ffe584599f50376bdbc9069704b0f1c12.png?v=1716526183"},{"product_id":"40mm-x-13-5mm-x-5mm-rectangular-pot-with-3mm-countersunk-holes-rare-earth","title":"40mm x 13.5mm x 5mm Rectangular Pot with 3mm Countersunk Holes (Rare Earth)","description":"\u003ctable data-mce-style=\"height: 36px; width: 100%;\" style=\"height: 36px; width: 100%;\" width=\"100%\"\u003e\u003ctbody\u003e\n\u003ctr style=\"height: 17px;\"\u003e\n\u003ctd style=\"width: 16.6059%; height: 17px;\"\u003e\u003cstrong\u003eLength (L) mm \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.6059%; height: 17px;\"\u003e\u003cstrong\u003eSpacing (L1) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px; width: 16.3321%;\"\u003e\u003cstrong\u003e Width (W) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eHeight (H) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eHole Size (M) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eWeight (Grams)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"width: 16.6059%; height: 19px;\"\u003e40\u003c\/td\u003e\n\u003ctd style=\"width: 16.6059%; height: 19px;\"\u003e30\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e13.5\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e5\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003ePull Strength:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e15kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirection of Magnetism:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGrade:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eN35\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- This Rectangular (Channel) Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr\u003e- Incorporates a countersunk hole for use with flathead screws.\u003cbr\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr\u003e- Maximum operating temperature 80°C \/ 100°C\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder Units:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSingle\u003c\/strong\u003e (Bulk discounts available on orders of 1,000pcs or more)\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":45173753348263,"sku":"3684","price":12.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/48ea550b7a5ab43a85e2e9697e0bb73d12243c3f.png?v=1716526460"},{"product_id":"80mm-x-13-5mm-x-5mm-rectangular-pot-with-3mm-countersunk-holes-rare-earth","title":"80mm x 13.5mm x 5mm Rectangular Pot with 3mm Countersunk Holes (Rare Earth)","description":"\u003ctable data-mce-style=\"height: 36px; width: 100%;\" style=\"height: 36px; width: 100%;\" width=\"100%\"\u003e\u003ctbody\u003e\n\u003ctr style=\"height: 17px;\"\u003e\n\u003ctd style=\"width: 16.6059%; height: 17px;\"\u003e\u003cstrong\u003eLength (L) mm \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.6059%; height: 17px;\"\u003e\u003cstrong\u003eSpacing (L1) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px; width: 16.3321%;\"\u003e\u003cstrong\u003e Width (W) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eHeight (H) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eHole Size (M) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eWeight (Grams)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"width: 16.6059%; height: 19px;\"\u003e80\u003c\/td\u003e\n\u003ctd style=\"width: 16.6059%; height: 19px;\"\u003e70\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e13.5\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e5\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003ePull Strength:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e32kg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirection of Magnetism:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGrade:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eN35\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- This Rectangular (Channel) Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr\u003e- Incorporates a countersunk hole for use with flathead screws.\u003cbr\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr\u003e- Maximum operating temperature 80°C \/ 100°C\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder Units:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSingle\u003c\/strong\u003e (Bulk discounts available on orders of 1,000pcs or more)\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":45198222295207,"sku":"3687","price":24.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/a3d2b625d5a8bc1903bbaf42452d41a56b3b4699.png?v=1717475452"},{"product_id":"120mm-x-13-5mm-x-5mm-rectangular-pot-with-3mm-countersunk-holes-rare-earth","title":"120mm x 13.5mm x 5mm Rectangular Pot with 3mm Countersunk Holes (Rare Earth)","description":"\u003ctable style=\"height: 36px; width: 100%;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 17px;\"\u003e\n\u003ctd style=\"width: 16.6059%; height: 17px;\"\u003e\u003cstrong\u003eLength (L) mm \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.6059%; height: 17px;\"\u003e\u003cstrong\u003eSpacing (L1) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px; width: 16.3321%;\"\u003e\u003cstrong\u003e Width (W) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eHeight (H) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eHole Size (M) mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 17px;\"\u003e\u003cstrong\u003eWeight (Grams)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"width: 16.6059%; height: 19px;\"\u003e120\u003c\/td\u003e\n\u003ctd style=\"width: 16.6059%; height: 19px;\"\u003eXX\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e13.5\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e5\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"width: 16.3321%; height: 19px;\"\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePull Strength:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eXXkg\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\"Axially\"\u003c\/strong\u003e magnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eN35\u003c\/strong\u003e In permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- This Rectangular (Channel) Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr\u003e- Incorporates a countersunk hole for use with flathead screws.\u003cbr\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr\u003e- Maximum operating temperature 80°C \/ 100°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrder Units:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSingle\u003c\/strong\u003e (Bulk discounts available on orders of 1,000pcs or more)\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":45198356316327,"sku":"3689","price":49.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/228cc40ec3ac514721e9847cedaa60d4e947e528.png?v=1716527438"},{"product_id":"75-x-18mm-pot-with-10-5mm-countersunk-hole-rare-earth","title":"75 x 18mm Pot with 10.5mm Countersunk Hole (Rare Earth)","description":"\u003cp\u003e\u003cstrong\u003eDimensions: Ø 75mm (Diameter) x 18mm (Thickness), 20mm Wide\/10.5mm Countersunk Bolt Hole\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Strength: 162kg\u003cbr\u003e\u003c\/strong\u003eThe approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection of Magnetism: \"Axially\"\u003c\/strong\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003emagnetised (top to bottom) thru 15mm thickness.The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade: N35\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003cbr\u003e\u003c\/strong\u003e- Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr\u003e- Incorporates an 10.5mm Countersunk Hole (Countersunk width is 20mm)\u003cbr\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr\u003e- Maximum operating temperature 80°C \/ 100°C    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrder Units: \u003cbr\u003e\u003c\/strong\u003eAvailable in individual units. \u003cbr\u003eBulk discounts available on orders of 100pcs or more. \u003cbr\u003e\u003cbr\u003e\u003cstrong data-end=\"268\" data-start=\"245\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\"\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\"\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr\u003e\u003c\/p\u003e","brand":"aussiemagnets","offers":[{"title":"Default Title","offer_id":46694455148711,"sku":"3719","price":112.84,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/rn-image_picker_lib_temp_4a53052f-5888-412f-96c2-5cd21df71f28.jpg?v=1743542139"},{"product_id":"10mm-x-4-5mm-pot-with-3-7mm-countersunk-hole-rare-earth","title":"10mm x 4.5mm Pot with 3.7mm Countersunk Hole (Rare Earth)","description":"\u003cp bis_size='{\"x\":11,\"y\":9,\"w\":506,\"h\":665,\"abs_x\":428,\"abs_y\":118}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":9,\"w\":478,\"h\":38,\"abs_x\":428,\"abs_y\":118}'\u003e Dimensions: Ø10mm (Diameter) x 4.5mm (Thickness), Ø3.7mm Through Hole \/ 7.4mm Countersunk Hole Diameter\u003c\/strong\u003e \u003cbr bis_size='{\"x\":293,\"y\":29,\"w\":0,\"h\":18,\"abs_x\":710,\"abs_y\":138}'\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mmm   \u003cbr bis_size='{\"x\":398,\"y\":68,\"w\":0,\"h\":18,\"abs_x\":815,\"abs_y\":177}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":87,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":196}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":107,\"w\":129,\"h\":18,\"abs_x\":428,\"abs_y\":216}'\u003ePull Strength: 1.2kg\u003cbr bis_size='{\"x\":141,\"y\":107,\"w\":0,\"h\":18,\"abs_x\":558,\"abs_y\":216}'\u003e\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.\u003cbr bis_size='{\"x\":449,\"y\":166,\"w\":0,\"h\":18,\"abs_x\":866,\"abs_y\":275}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":185,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":294}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":205,\"w\":222,\"h\":18,\"abs_x\":428,\"abs_y\":314}'\u003eDirection of Magnetism: \"Axially\"\u003cbr bis_size='{\"x\":234,\"y\":205,\"w\":0,\"h\":18,\"abs_x\":651,\"abs_y\":314}'\u003e\u003c\/strong\u003eMagnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised. \u003cbr bis_size='{\"x\":153,\"y\":244,\"w\":0,\"h\":18,\"abs_x\":570,\"abs_y\":353}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":264,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":373}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":283,\"w\":74,\"h\":18,\"abs_x\":428,\"abs_y\":392}'\u003eGrade: N35\u003cbr bis_size='{\"x\":86,\"y\":283,\"w\":0,\"h\":18,\"abs_x\":503,\"abs_y\":392}'\u003e\u003c\/strong\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003cbr bis_size='{\"x\":347,\"y\":342,\"w\":0,\"h\":18,\"abs_x\":764,\"abs_y\":451}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":362,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":471}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":381,\"w\":59,\"h\":18,\"abs_x\":428,\"abs_y\":490}'\u003eFeatures:\u003c\/strong\u003e\u003cbr bis_size='{\"x\":71,\"y\":381,\"w\":0,\"h\":18,\"abs_x\":488,\"abs_y\":490}'\u003e- Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr bis_size='{\"x\":505,\"y\":401,\"w\":0,\"h\":18,\"abs_x\":922,\"abs_y\":510}'\u003e- Incorporates a countersunk hole for use with flathead screws.\u003cbr bis_size='{\"x\":398,\"y\":420,\"w\":0,\"h\":18,\"abs_x\":815,\"abs_y\":529}'\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr bis_size='{\"x\":356,\"y\":440,\"w\":0,\"h\":18,\"abs_x\":773,\"abs_y\":549}'\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr bis_size='{\"x\":383,\"y\":460,\"w\":0,\"h\":18,\"abs_x\":800,\"abs_y\":569}'\u003e- Maximum operating temperature 80°C \/ 100°C    \u003cbr bis_size='{\"x\":325,\"y\":479,\"w\":0,\"h\":18,\"abs_x\":742,\"abs_y\":588}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":518,\"w\":193,\"h\":18,\"abs_x\":428,\"abs_y\":627}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":499,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":608}'\u003eOrder Units: Sold Individually\u003c\/strong\u003e\u003cbr bis_size='{\"x\":205,\"y\":518,\"w\":0,\"h\":18,\"abs_x\":622,\"abs_y\":627}'\u003eBulk discounts available on orders of 1,000pcs or more. \u003cbr bis_size='{\"x\":355,\"y\":538,\"w\":0,\"h\":18,\"abs_x\":772,\"abs_y\":647}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":557,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":666}'\u003e\u003cstrong data-end=\"268\" data-start=\"245\" bis_size='{\"x\":11,\"y\":577,\"w\":134,\"h\":18,\"abs_x\":428,\"abs_y\":686}'\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\" bis_size='{\"x\":146,\"y\":577,\"w\":0,\"h\":18,\"abs_x\":563,\"abs_y\":686}'\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\" bis_size='{\"x\":11,\"y\":655,\"w\":46,\"h\":18,\"abs_x\":428,\"abs_y\":764}'\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\" bis_size='{\"x\":65,\"y\":655,\"w\":199,\"h\":18,\"abs_x\":482,\"abs_y\":764}'\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr bis_size='{\"x\":370,\"y\":655,\"w\":0,\"h\":18,\"abs_x\":787,\"abs_y\":764}'\u003e\u003c\/p\u003e","brand":"Aussie Magnets","offers":[{"title":"Default Title","offer_id":47346913083559,"sku":"3732","price":1.87,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/rn-image_picker_lib_temp_2416812d-5603-4317-94f8-43674b49533f.jpg?v=1771626520"},{"product_id":"12mm-x-4-5mm-pot-with-3-7mm-countersunk-hole-rare-earth","title":"12mm x 4.5mm Pot with 3.7mm Countersunk Hole (Rare Earth)","description":"\u003cp bis_size='{\"x\":11,\"y\":9,\"w\":506,\"h\":665,\"abs_x\":428,\"abs_y\":118}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":9,\"w\":474,\"h\":38,\"abs_x\":428,\"abs_y\":118}'\u003eDimensions: Ø12mm (Diameter) x 4.5mm (Thickness), Ø3.7mm Through Hole \/ 7.4mm Countersunk Hole Diameter\u003c\/strong\u003e \u003cbr bis_size='{\"x\":293,\"y\":29,\"w\":0,\"h\":18,\"abs_x\":710,\"abs_y\":138}'\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mmm   \u003cbr bis_size='{\"x\":398,\"y\":68,\"w\":0,\"h\":18,\"abs_x\":815,\"abs_y\":177}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":87,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":196}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":107,\"w\":129,\"h\":18,\"abs_x\":428,\"abs_y\":216}'\u003ePull Strength: 3.2kg\u003cbr bis_size='{\"x\":141,\"y\":107,\"w\":0,\"h\":18,\"abs_x\":558,\"abs_y\":216}'\u003e\u003c\/strong\u003e The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.\u003cbr bis_size='{\"x\":449,\"y\":166,\"w\":0,\"h\":18,\"abs_x\":866,\"abs_y\":275}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":185,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":294}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":205,\"w\":222,\"h\":18,\"abs_x\":428,\"abs_y\":314}'\u003eDirection of Magnetism: \"Axially\"\u003cbr bis_size='{\"x\":234,\"y\":205,\"w\":0,\"h\":18,\"abs_x\":651,\"abs_y\":314}'\u003e\u003c\/strong\u003eMagnetised (top to bottom) thru 5mm thickness. The axis through which a product is magnetised. \u003cbr bis_size='{\"x\":153,\"y\":244,\"w\":0,\"h\":18,\"abs_x\":570,\"abs_y\":353}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":264,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":373}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":283,\"w\":74,\"h\":18,\"abs_x\":428,\"abs_y\":392}'\u003eGrade: N35\u003cbr bis_size='{\"x\":86,\"y\":283,\"w\":0,\"h\":18,\"abs_x\":503,\"abs_y\":392}'\u003e\u003c\/strong\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.     \u003cbr bis_size='{\"x\":347,\"y\":342,\"w\":0,\"h\":18,\"abs_x\":764,\"abs_y\":451}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":362,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":471}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":381,\"w\":59,\"h\":18,\"abs_x\":428,\"abs_y\":490}'\u003eFeatures:\u003c\/strong\u003e\u003cbr bis_size='{\"x\":71,\"y\":381,\"w\":0,\"h\":18,\"abs_x\":488,\"abs_y\":490}'\u003e- Magnet is encapsulated on all but one side with a protective steel holding pot.\u003cbr bis_size='{\"x\":505,\"y\":401,\"w\":0,\"h\":18,\"abs_x\":922,\"abs_y\":510}'\u003e- Incorporates a countersunk hole for use with flathead screws.\u003cbr bis_size='{\"x\":398,\"y\":420,\"w\":0,\"h\":18,\"abs_x\":815,\"abs_y\":529}'\u003e- Powerful Rare Earth (Neodymium) permanent magnet.\u003cbr bis_size='{\"x\":356,\"y\":440,\"w\":0,\"h\":18,\"abs_x\":773,\"abs_y\":549}'\u003e- High gloss Nickel coating, for protection against corrosion.\u003cbr bis_size='{\"x\":383,\"y\":460,\"w\":0,\"h\":18,\"abs_x\":800,\"abs_y\":569}'\u003e- Maximum operating temperature 80°C \/ 100°C    \u003cbr bis_size='{\"x\":325,\"y\":479,\"w\":0,\"h\":18,\"abs_x\":742,\"abs_y\":588}'\u003e\u003cstrong bis_size='{\"x\":11,\"y\":518,\"w\":193,\"h\":18,\"abs_x\":428,\"abs_y\":627}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":499,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":608}'\u003eOrder Units: Sold Individually\u003c\/strong\u003e\u003cbr bis_size='{\"x\":205,\"y\":518,\"w\":0,\"h\":18,\"abs_x\":622,\"abs_y\":627}'\u003eBulk discounts available on orders of 1,000pcs or more. \u003cbr bis_size='{\"x\":355,\"y\":538,\"w\":0,\"h\":18,\"abs_x\":772,\"abs_y\":647}'\u003e\u003cbr bis_size='{\"x\":11,\"y\":557,\"w\":0,\"h\":18,\"abs_x\":428,\"abs_y\":666}'\u003e\u003cstrong data-end=\"268\" data-start=\"245\" bis_size='{\"x\":11,\"y\":577,\"w\":134,\"h\":18,\"abs_x\":428,\"abs_y\":686}'\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"271\" data-start=\"268\" bis_size='{\"x\":146,\"y\":577,\"w\":0,\"h\":18,\"abs_x\":563,\"abs_y\":686}'\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our \u003ca href=\"https:\/\/aussiemagnets.com.au\/search?type=product\u0026amp;amp;options%5Bprefix%5D=last\u0026amp;amp;q=painted\" bis_size='{\"x\":11,\"y\":655,\"w\":46,\"h\":18,\"abs_x\":428,\"abs_y\":764}'\u003epainted\u003c\/a\u003e, \u003ca href=\"https:\/\/aussiemagnets.com.au\/collections\/rubber-plastic-coated\" bis_size='{\"x\":65,\"y\":655,\"w\":199,\"h\":18,\"abs_x\":482,\"abs_y\":764}'\u003erubber-coated, or plastic-coated\u003c\/a\u003e magnet options.\u003cbr bis_size='{\"x\":370,\"y\":655,\"w\":0,\"h\":18,\"abs_x\":787,\"abs_y\":764}'\u003e\u003c\/p\u003e","brand":"Aussie Magnets","offers":[{"title":"Default Title","offer_id":47346913640615,"sku":"3733","price":2.39,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/rn-image_picker_lib_temp_8f528d1e-4085-4c36-a118-8e5c14b53877.jpg?v=1771632207"},{"product_id":"25mm-x-6-8mm-low-profile-pot-with-5-5mm-countersunk-hole-rare-earth","title":"25mm x 6.8mm Low Profile Pot with 5.5mm Countersunk Hole (Rare Earth)","description":"\u003cp data-end=\"378\" data-start=\"115\"\u003e\u003cstrong data-end=\"130\" data-start=\"115\"\u003eDimensions:\u003c\/strong\u003e Ø 25mm (Diameter)  x  6.8mm (Thickness),  Ø 5.5mm (Countersunk hole diameter)\u003cbr data-end=\"226\" data-start=\"223\"\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm.    \u003c\/p\u003e\n\u003cp data-end=\"640\" data-start=\"380\"\u003e\u003cstrong data-end=\"398\" data-start=\"380\"\u003ePull Strength:\u003c\/strong\u003e 13kg\u003cbr data-end=\"406\" data-start=\"403\"\u003eThe approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp data-end=\"859\" data-start=\"642\"\u003e\u003cstrong data-end=\"665\" data-start=\"642\"\u003eLow Profile Design:\u003c\/strong\u003e\u003cbr data-end=\"668\" data-start=\"665\"\u003eSlim 6.8mm profile makes this magnet ideal for applications where space is limited or a more discreet mounting solution is required, with minimal loss to holding performance.    \u003c\/p\u003e\n\u003cp data-end=\"1153\" data-start=\"861\"\u003e\u003cstrong data-end=\"888\" data-start=\"861\"\u003eDirection of Magnetism: \u003c\/strong\u003e\"Axially\"\u003cbr\u003eMagnetised (top to bottom) thru 6.8mm thickness.\u003cbr data-end=\"952\" data-start=\"949\"\u003eThe axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp data-end=\"1399\" data-start=\"1155\"\u003e\u003cstrong data-end=\"1165\" data-start=\"1155\"\u003eGrade:\u003c\/strong\u003e N35\u003cbr data-end=\"1172\" data-start=\"1169\"\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.      \u003c\/p\u003e\n\u003cp data-end=\"1416\" data-start=\"1401\"\u003e\u003cstrong data-end=\"1414\" data-start=\"1401\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1802\" data-start=\"1417\"\u003e\n\u003cli data-end=\"1478\" data-start=\"1417\" data-section-id=\"cnn9e6\"\u003eLow profile steel pot design for a slimmer overall height\u003c\/li\u003e\n\u003cli data-end=\"1561\" data-start=\"1479\" data-section-id=\"1mv3aio\"\u003eMagnet is encapsulated on all but one side with a protective steel holding pot\u003c\/li\u003e\n\u003cli data-end=\"1626\" data-start=\"1562\" data-section-id=\"65u2kp\"\u003eIncorporates a countersunk hole for use with flathead screws\u003c\/li\u003e\n\u003cli data-end=\"1679\" data-start=\"1627\" data-section-id=\"9lnk4s\"\u003ePowerful Rare Earth (Neodymium) permanent magnet\u003c\/li\u003e\n\u003cli data-end=\"1743\" data-start=\"1680\" data-section-id=\"l0cg46\"\u003eHigh gloss Nickel coating, for protection against corrosion\u003c\/li\u003e\n\u003cli data-end=\"1802\" data-start=\"1744\" data-section-id=\"atevdz\"\u003eMaximum operating temperature 80°C \/ 100°C    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1917\" data-start=\"1804\"\u003e\u003cstrong data-end=\"1820\" data-start=\"1804\"\u003eOrder Units:\u003c\/strong\u003e\u003cbr data-end=\"1823\" data-start=\"1820\"\u003eAvailable in individual units\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-end=\"2246\" data-start=\"1919\"\u003e\u003cstrong data-end=\"1942\" data-start=\"1919\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-end=\"1945\" data-start=\"1942\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our painted, rubber-coated, or plastic-coated magnet options.\u003c\/p\u003e","brand":"Aussie Magnets","offers":[{"title":"Default Title","offer_id":47680670040231,"sku":"3713A","price":5.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/rn-image_picker_lib_temp_191ef93c-a9ce-4c3a-895d-f55df454b340.jpg?v=1776171068"},{"product_id":"32mm-x-6-8mm-low-profile-pot-with-5-5mm-countersunk-hole-rare-earth","title":"32mm x 6.8mm Low Profile Pot with 5.5mm Countersunk Hole (Rare Earth)","description":"\u003cp data-start=\"115\" data-end=\"378\"\u003e\u003cstrong data-start=\"115\" data-end=\"130\"\u003eDimensions:\u003c\/strong\u003e Ø 32mm (Diameter)  x  6.8mm (Thickness),  Ø 5.5mm (Countersunk hole diameter)\u003cbr data-start=\"223\" data-end=\"226\"\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm.    \u003c\/p\u003e\n\u003cp data-start=\"380\" data-end=\"640\"\u003e\u003cstrong data-start=\"380\" data-end=\"398\"\u003ePull Strength:\u003c\/strong\u003e 22kg\u003cbr data-start=\"403\" data-end=\"406\"\u003eThe approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp data-start=\"642\" data-end=\"859\"\u003e\u003cstrong data-start=\"642\" data-end=\"665\"\u003eLow Profile Design:\u003c\/strong\u003e\u003cbr data-start=\"665\" data-end=\"668\"\u003eSlim 6.8mm profile makes this magnet ideal for applications where space is limited or a more discreet mounting solution is required, with minimal loss to holding performance.    \u003c\/p\u003e\n\u003cp data-start=\"861\" data-end=\"1153\"\u003e\u003cstrong data-start=\"861\" data-end=\"888\"\u003eDirection of Magnetism: \u003c\/strong\u003e\"Axially\"\u003cbr\u003eMagnetised (top to bottom) thru 6.8mm thickness.\u003cbr data-start=\"949\" data-end=\"952\"\u003eThe axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp data-start=\"1155\" data-end=\"1399\"\u003e\u003cstrong data-start=\"1155\" data-end=\"1165\"\u003eGrade:\u003c\/strong\u003e N35\u003cbr data-start=\"1169\" data-end=\"1172\"\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.      \u003c\/p\u003e\n\u003cp data-start=\"1401\" data-end=\"1416\"\u003e\u003cstrong data-start=\"1401\" data-end=\"1414\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1417\" data-end=\"1802\"\u003e\n\u003cli data-section-id=\"cnn9e6\" data-start=\"1417\" data-end=\"1478\"\u003eLow profile steel pot design for a slimmer overall height\u003c\/li\u003e\n\u003cli data-section-id=\"1mv3aio\" data-start=\"1479\" data-end=\"1561\"\u003eMagnet is encapsulated on all but one side with a protective steel holding pot\u003c\/li\u003e\n\u003cli data-section-id=\"65u2kp\" data-start=\"1562\" data-end=\"1626\"\u003eIncorporates a countersunk hole for use with flathead screws\u003c\/li\u003e\n\u003cli data-section-id=\"9lnk4s\" data-start=\"1627\" data-end=\"1679\"\u003ePowerful Rare Earth (Neodymium) permanent magnet\u003c\/li\u003e\n\u003cli data-section-id=\"l0cg46\" data-start=\"1680\" data-end=\"1743\"\u003eHigh gloss Nickel coating, for protection against corrosion\u003c\/li\u003e\n\u003cli data-section-id=\"atevdz\" data-start=\"1744\" data-end=\"1802\"\u003eMaximum operating temperature 80°C \/ 100°C    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1804\" data-end=\"1917\"\u003e\u003cstrong data-start=\"1804\" data-end=\"1820\"\u003eOrder Units:\u003c\/strong\u003e\u003cbr data-start=\"1820\" data-end=\"1823\"\u003eAvailable in individual units\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"1919\" data-end=\"2246\"\u003e\u003cstrong data-start=\"1919\" data-end=\"1942\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-start=\"1942\" data-end=\"1945\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our painted, rubber-coated, or plastic-coated magnet options.\u003c\/p\u003e","brand":"Aussie Magnets","offers":[{"title":"Default Title","offer_id":47680671809703,"sku":"3714A","price":7.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/3714A_2.png?v=1776339779"},{"product_id":"36mm-x-6-8mm-low-profile-pot-with-5-5mm-countersunk-hole-rare-earth","title":"36mm x 6.8mm Low Profile Pot with 5.5mm Countersunk Hole (Rare Earth)","description":"\u003cp data-start=\"115\" data-end=\"378\"\u003e\u003cstrong data-start=\"115\" data-end=\"130\"\u003eDimensions:\u003c\/strong\u003e Ø 36mm (Diameter)  x  6.8mm (Thickness),  Ø 5.5mm (Countersunk hole diameter)\u003cbr data-start=\"223\" data-end=\"226\"\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm.    \u003c\/p\u003e\n\u003cp data-start=\"380\" data-end=\"640\"\u003e\u003cstrong data-start=\"380\" data-end=\"398\"\u003ePull Strength:\u003c\/strong\u003e 25kg\u003cbr data-start=\"403\" data-end=\"406\"\u003eThe approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp data-start=\"642\" data-end=\"859\"\u003e\u003cstrong data-start=\"642\" data-end=\"665\"\u003eLow Profile Design:\u003c\/strong\u003e\u003cbr data-start=\"665\" data-end=\"668\"\u003eSlim 6.8mm profile makes this magnet ideal for applications where space is limited or a more discreet mounting solution is required, with minimal loss to holding performance.    \u003c\/p\u003e\n\u003cp data-start=\"861\" data-end=\"1153\"\u003e\u003cstrong data-start=\"861\" data-end=\"888\"\u003eDirection of Magnetism: \u003c\/strong\u003e\"Axially\"\u003cbr\u003eMagnetised (top to bottom) thru 6.8mm thickness.\u003cbr data-start=\"949\" data-end=\"952\"\u003eThe axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp data-start=\"1155\" data-end=\"1399\"\u003e\u003cstrong data-start=\"1155\" data-end=\"1165\"\u003eGrade:\u003c\/strong\u003e N35\u003cbr data-start=\"1169\" data-end=\"1172\"\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.      \u003c\/p\u003e\n\u003cp data-start=\"1401\" data-end=\"1416\"\u003e\u003cstrong data-start=\"1401\" data-end=\"1414\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1417\" data-end=\"1802\"\u003e\n\u003cli data-section-id=\"cnn9e6\" data-start=\"1417\" data-end=\"1478\"\u003eLow profile steel pot design for a slimmer overall height\u003c\/li\u003e\n\u003cli data-section-id=\"1mv3aio\" data-start=\"1479\" data-end=\"1561\"\u003eMagnet is encapsulated on all but one side with a protective steel holding pot\u003c\/li\u003e\n\u003cli data-section-id=\"65u2kp\" data-start=\"1562\" data-end=\"1626\"\u003eIncorporates a countersunk hole for use with flathead screws\u003c\/li\u003e\n\u003cli data-section-id=\"9lnk4s\" data-start=\"1627\" data-end=\"1679\"\u003ePowerful Rare Earth (Neodymium) permanent magnet\u003c\/li\u003e\n\u003cli data-section-id=\"l0cg46\" data-start=\"1680\" data-end=\"1743\"\u003eHigh gloss Nickel coating, for protection against corrosion\u003c\/li\u003e\n\u003cli data-section-id=\"atevdz\" data-start=\"1744\" data-end=\"1802\"\u003eMaximum operating temperature 80°C \/ 100°C    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1804\" data-end=\"1917\"\u003e\u003cstrong data-start=\"1804\" data-end=\"1820\"\u003eOrder Units:\u003c\/strong\u003e\u003cbr data-start=\"1820\" data-end=\"1823\"\u003eAvailable in individual units\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"1919\" data-end=\"2246\"\u003e\u003cstrong data-start=\"1919\" data-end=\"1942\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-start=\"1942\" data-end=\"1945\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our painted, rubber-coated, or plastic-coated magnet options.\u003c\/p\u003e","brand":"Aussie Magnets","offers":[{"title":"Default Title","offer_id":47680677707943,"sku":"3718A","price":11.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/3718A_1_d930d05a-bc4c-4be7-ae27-707d5925adae.png?v=1776339334"},{"product_id":"48mm-x-9-35mm-low-profile-pot-with-8-5mm-countersunk-hole-rare-earth","title":"48mm x 9.35mm Low Profile Pot with 8.5mm Countersunk Hole (Rare Earth)","description":"\u003cp data-start=\"115\" data-end=\"378\"\u003e\u003cstrong data-start=\"115\" data-end=\"130\"\u003eDimensions:\u003c\/strong\u003e Ø 48mm (Diameter)  x  9.35mm (Thickness),  Ø 8.5mm (Countersunk hole diameter)\u003cbr data-start=\"223\" data-end=\"226\"\u003eThe dimensions of the product are measured in metric units, with an approximate \"tolerance\" (manufacturing margin of error) of +\/- 0.05mm.    \u003c\/p\u003e\n\u003cp data-start=\"380\" data-end=\"640\"\u003e\u003cstrong data-start=\"380\" data-end=\"398\"\u003ePull Strength:\u003c\/strong\u003e 56kg\u003cbr data-start=\"403\" data-end=\"406\"\u003eThe approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These \"strengths\" are measured using mathematical calculations, and should be used as a general guide only.    \u003c\/p\u003e\n\u003cp data-start=\"642\" data-end=\"859\"\u003e\u003cstrong data-start=\"642\" data-end=\"665\"\u003eLow Profile Design:\u003c\/strong\u003e\u003cbr data-start=\"665\" data-end=\"668\"\u003eSlim 9.35mm profile makes this magnet ideal for applications where space is limited or a more discreet mounting solution is required, with minimal loss to holding performance.    \u003c\/p\u003e\n\u003cp data-start=\"861\" data-end=\"1153\"\u003e\u003cstrong data-start=\"861\" data-end=\"888\"\u003eDirection of Magnetism: \u003c\/strong\u003e\"Axially\"\u003cbr\u003eMagnetised (top to bottom) thru 9.35mm thickness.\u003cbr data-start=\"949\" data-end=\"952\"\u003eThe axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.    \u003c\/p\u003e\n\u003cp data-start=\"1155\" data-end=\"1399\"\u003e\u003cstrong data-start=\"1155\" data-end=\"1165\"\u003eGrade:\u003c\/strong\u003e \u003cstrong\u003eN35\u003c\/strong\u003e\u003cbr data-start=\"1169\" data-end=\"1172\"\u003eIn permanent magnets, the grade refers to the materials used in the production process. Material \"grades\" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre.      \u003c\/p\u003e\n\u003cp data-start=\"1401\" data-end=\"1416\"\u003e\u003cstrong data-start=\"1401\" data-end=\"1414\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1417\" data-end=\"1802\"\u003e\n\u003cli data-section-id=\"cnn9e6\" data-start=\"1417\" data-end=\"1478\"\u003eLow profile steel pot design for a slimmer overall height\u003c\/li\u003e\n\u003cli data-section-id=\"1mv3aio\" data-start=\"1479\" data-end=\"1561\"\u003eMagnet is encapsulated on all but one side with a protective steel holding pot\u003c\/li\u003e\n\u003cli data-section-id=\"65u2kp\" data-start=\"1562\" data-end=\"1626\"\u003eIncorporates a countersunk hole for use with flathead screws\u003c\/li\u003e\n\u003cli data-section-id=\"9lnk4s\" data-start=\"1627\" data-end=\"1679\"\u003ePowerful Rare Earth (Neodymium) permanent magnet\u003c\/li\u003e\n\u003cli data-section-id=\"l0cg46\" data-start=\"1680\" data-end=\"1743\"\u003eHigh gloss Nickel coating, for protection against corrosion\u003c\/li\u003e\n\u003cli data-section-id=\"atevdz\" data-start=\"1744\" data-end=\"1802\"\u003eMaximum operating temperature 80°C \/ 100°C    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1804\" data-end=\"1917\"\u003e\u003cstrong data-start=\"1804\" data-end=\"1820\"\u003eOrder Units:\u003c\/strong\u003e\u003cbr data-start=\"1820\" data-end=\"1823\"\u003eAvailable in individual units\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"1919\" data-end=\"2246\"\u003e\u003cstrong data-start=\"1919\" data-end=\"1942\"\u003eOutdoor Use Notice:\u003c\/strong\u003e\u003cbr data-start=\"1942\" data-end=\"1945\"\u003eNi-Cu-Ni (Nickel Copper Nickel) coating provides basic corrosion resistance only. In outdoor or high-moisture environments, surface corrosion will occur over time. For outdoor use, we recommend applying a protective paint layer or consider our painted, rubber-coated, or plastic-coated magnet options.\u003c\/p\u003e","brand":"Aussie Magnets","offers":[{"title":"Default Title","offer_id":47680683147431,"sku":"3716A","price":34.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/5834\/8199\/files\/32548.jpg?v=1776338787"}],"url":"https:\/\/aussiemagnets.com.au\/collections\/neodymium-countersunk-pots.oembed","provider":"Aussie Magnets","version":"1.0","type":"link"}