3mm x 2mm Disc
Rare Earth
Pack of 100

  • Image 1
  • Image 2
Pull Strength:
199g ?
5,400 Gauss
Direction of Magnetism:
Axially (thru 2mm) ?
± 0.05mm
Gloss Nickel
Max Operating Temp:
80°C / 100°C
Magnet Type:

Item No:

(includes GST)
Pack of:



Ø 3mm (Diameter)  x  2mm (Thickness)
The dimensions of the product are measured in metric units, with an approximate "tolerance" (manufacturing margin of error) of +/- 0.05mm


Pull Strength:
The approximate force (in metric units) required to remove a magnet from industry-standard 3mm thick mild steel. These "strengths" are measured using mathematical calculations, and should be used as a general guide only.


Direction of Magnetism:
"Axially" magnetised (top to bottom) thru 2mm thickness.
The axis through which a product is magnetised. Products may be magnetised axially, diametrically or otherwise (e.g. multipole). See more about directions of magnetism at our Help Centre.


5,400 Gauss
A measurement of surface "magnetic induction" (B), equal to one ten-thousandth of a Tesla. Gauss indicates the number of lines of magnetic flux per square centimetre, under the CGS metric system.


In permanent magnets, the grade refers to the materials used in the production process. Material "grades" range from low end (weaker) to high end (stronger). See more about magnet grades at our Help Centre. 


- Powerful Rare Earth (Neodymium) permanent magnet.
- High gloss Nickel coating, for protection against corrosion.
- Maximum operating temperature 80°C / 100°C


Order Units:
Available in packs of 100pcs.
Bulk discounts available on orders of 1,000pcs or more. Please contact us to get started.

Add to Shortlist

Click the button below to add the 3mm x 2mm Disc (Rare Earth) (Pack of 100) to your shortlist.

Write your own review


  1. Secure parts on models

    Posted by Justin Baldock on 23rd Sep 2010

    I was looking for a way to have changeable parts on some models. I had seen an article taking about using magnets. I got a bag of these little beasties and they did the job. Drilled in to main body of the model and glued them in and used pins in the smaller parts. At the time this were the smallest. Going to get some 3x1 soon.

Your Shopping Cart

Nothing in your cart.

Subtotal: AUD$0.00

View Cart | Checkout

Recently Viewed